不同GPS掩星电离层剖面产品相关性分析     

周荣  侯威震  曾晨曦  张绍成  柴炳阳 《测绘通报》2019,(11):31-38,73

将在一定时空限定范围内的不同低轨卫星COSMIC、GRACE、CHAMP、FY3C的电离层掩星电子密度剖面定义为一个掩星对来对比分析不同类型掩星电离层产品。结果表明：COSMIC掩星对之间的电子密度剖面整体轮廓符合得很好，电子密度剖面主要在250 km以下和500 km以上存在较大的偏差，250~500 km的电子密度整体偏差较小，统计得到的COSMIC掩星对的电子密度参量NmF2和hmF2的相关系数能分别达到0.99和0.97，具有高度相关性，不同COSMIC卫星之间没有明显的系统误差；COSMIC、GRACE、CHAMP和FY3C不同低轨卫星间的电子密度剖面略有差异，通过统计电子密度参量NmF2和hmF2之间的相关系数，COSMIC和CHAMP的相关系数分别为0.95和0.86，COSMIC和GRACE的相关系数分别为0.98和0.94，COSMIC和FY3C的相关系数分别为0.96和0.92，不同掩星类型之间的电子密度参量之间也具有高度相关性，验证了不同卫星任务GPS掩星电离层剖面的一致性。  相似文献   

长江口外潮汐精细化模型研究与精度分析     

季凯敏  路川藤 《海洋技术学报》2019,38(5)

长江口外海上测量除受风浪影响较大外,最重要的问题是潮位控制非常困难。文中简要阐述了开展长江口外潮汐精细化模型研究的方法,介绍了利用潮汐精细化模型对长江口外航路任意点进行潮汐预报的方法,并通过实测数据进行了精度分析,提出了建议。  相似文献   

关于我国海洋可再生能源产业化发展的思考          下载免费PDF全文

王项南  贾宁  薛彩霞  王冀  麻常雷 《海洋开发与管理》2019,36(12):14-18

为推动我国海洋可再生能源产业发展,文章论述国内和国际海洋可再生能源开发利用在资源量、政策和技术等方面的发展现状,分析我国现阶段发展海洋可再生能源存在的主要问题,并提出未来我国海洋可再生能源产业化在顶层规划、关键核心技术、公共服务平台和标准体系建设、技术示范应用、成果转化以及国际合作等方面的发展建议,从而促进我国生态文明和海洋强国建设。  相似文献   

巴丹吉林沙漠北缘拐子湖流沙下垫面近地层湍流强度和陆面过程特征     

郑新倩  杨帆  李超凡  潘红林  吉春容  买买提艾力&#  买买提依明  霍文  杨兴华  周成龙 《中国沙漠》2019,39(4):103-112

利用巴丹吉林沙漠北缘拐子湖流沙下垫面2013年7、10月和2014年1、4月的湍流通量资料，计算并分析了研究区近地层湍流强度，同时针对风速分量、温度、水汽和CO₂归一化标准差随稳定度的变化关系和总体输送系数等陆面过程特征进行分析。结果表明：（1）风速各分量的湍流强度均随风速的增加逐渐减小，风速处于2 m·s^-1以下时湍流发展最为旺盛。湍流强度主要由水平方向风速分量决定，垂直方向风速的作用较小，且近中性和不稳定层结利于湍流的发展。与其他地区相比，平坦且没有建筑物的沙漠地区，机械湍流较弱，湍流强度相应较小。（2）风速各分量的归一化标准差与稳定度（z/L）均满足1/3次方函数规律，其中垂直方向风速分量的拟合曲线方程较好。（3）动量输送系数C_d具有明显的夏季高、冬季低的变化状态且各月的日变化形态均呈夜间低、日间高的循环形态。热量输送系数C_h的不同月份日变化间并没有明显的排列次序，且日出日落前后具有明显的波动。不稳定层结时，C_d和C_h均随风速的增加逐渐减小；稳定层结时，C_d和C_h均随着风速的增加逐渐上升。  相似文献   

Sandstone Turning by Abrasive Waterjet     

Petr Hlaváček  Ján Cárach  Sergej Hloch  Karol Vasilko  Dagmar Klichová  Jiří Klich  Dominika Lehocká 《Rock Mechanics and Rock Engineering》2015,48(6):2489-2493

  相似文献   

Controlled decoherence of floating flux qubits     

嵇英华  徐林 《海洋学报(英文版)》2010,29(11)

In Born--Markov approximation, this paper calculates the energy relaxation time T₁ and the decoherence time T₂ of a floating flux qubit by solving the set of Bloch--Redfield equations. It shows that there are two main factors influencing the floating flux qubits: coupling capacitor in the circuit and the environment resistor. It also discusses how to improve the quantum coherence time of a qubit. Through shunt connecting/ series connecting inductive elements, an inductive environment resistor is obtained and further the reactance component of the environment resistor is improved，which is beneficial to the enhancement of decoherence time of floating flux qubits.  相似文献   

A Study on the CO Isotopic Lines of the Star Forming Region AFGL 5157     

MAO Chun-hua  YANG Ji  LU Deng-rong 《Chinese Astronomy and Astrophysics》2014

By the mapping observations simultaneously at the ¹²CO (J=1-0), ¹³CO (J=1-0), and C¹⁸O (J=1-0) lines on the area of 24’×24’ (12 pc×12 pc) of the star forming region AFGL 5157, we have obtained the distribution and averaged physical parameters for the respective ¹³CO and C¹⁸O cores of this molecu- lar cloud. At the edge of the molecular cloud, the isotopic abundance ratio is X [(¹³CO)/(C¹⁸O)] ≈ 10, close to the ratio of a giant molecular cloud. The viral masses of the ¹³CO and C¹⁸O cores are less than the masses of the molecu-lar cloud cores, so the molecular cloud cores are gravitationally unstable, and the C¹⁸O molecular cloud core is more easy to collapse. The column density distributions of the C¹⁸O molecular cloud core in the northeast and southwest directions are, respectively, 1.1 × 10²³× z^−0.43 and 4.6 × 10²⁵× z^−0.58, where z is the distance from the center of the molecular cloud core. The high velocity molecular out?ow has been con?rmed from our ¹²CO spectra, the mass loss rate of the out?ow has been estimated, and the mass-velocity relation of the out?ow is ?tted by a power-law function of m ∝ v^−1.8. The star formation rate of the ¹³CO molecular cloud core is as high as 23%, probably, under the in?uence of  相似文献   

A new method for platform design based on parametric technology     

Yan-Yun Yu  Ming Chen  Yan Lin  Zhuo-Shang Ji 《Ocean Engineering》2010,37(5-6):473-482

A new method for platform design, named parametric platform design method (PPDM), is presented in this paper in order to improve the mobile platform design efficiency. In this method, an integrated parametric system that fully considers the characteristics of the platform is developed, which significantly optimizes the design process with the top–bottom design concept. In the parametric system, the main geometric dimensions are taken as parameters, while the topology between the structure members, the function requirements and the safety requirements are converted into geometric constraints. By geometric constraint solving (GCS), a set of parameters that satisfy all the given constraints are determined, and then the design scheme is obtained by several core algorithms, such as parametric tank subdivision, 3D stability calculation, parametric structure design, FEM preprocessing, etc. The parametric method greatly increases the changeability and the reusability of the platform model, and concurrent design is well supported. As the model is driven by parameters, PPDM is an excellent method for optimization design. As a result, PPDM has incomparable advantages on the design efficiency over traditional methods.  相似文献   

极性分子型电流变液导电机理研究     

王学昭  沈容  路阳  纪爱玲  孙刚  陆坤权  崔平 《海洋学报》2010,32(10):7144-7148

极性分子型电流变液是一种新型的电流变材料.其介电颗粒上吸附极性分子,极性分子在颗粒间强局域电场作用下发生取向是产生巨电流变效应的关键.通过对Ca—Ti—O(CTO)体系极性分子型电流变液电流密度的测量发现,其导电行为遵从Poole-Frenkel效应的规律,这是极性分子型电流变液的重要特征之一.而500 ℃处理过的CTO粉体不含极性分子,所配制的电流变液无巨电流变效应,其电流密度随外电场强度近似地呈线性关系,显示出传统电流变液特性.  相似文献   

基于内侧缓冲区算法的多边形骨架线提取模型          下载免费PDF全文

刘秀芳  杨永平  罗吉  高王军 《海洋测绘》2010,30(5):46-48

多边形的骨架线其本质是对多边形的抽象描述,合理的提取多边形的骨架线能够准确描述多边形的形态。给出了内侧缓冲区算法的定义及特性,提出利用内侧缓冲区算法提取多边形骨架线的模型,并给出了提取骨架线的实验。  相似文献